| Hollow Stem Augers
Down the Hole Hammer
Remote 9600P Tether Unit
ENPRO Services, Inc. has the equipment to help you perform subsurface investigations at your client’s site when standard drill rigs are too big for the job or impact to the site surface is a concern. ENPRO’s 9600 Power Probe walks into the roughest or most fragile of terrain on its minimal ground disturbing rubber tracks. ENPRO’s 9600 Power Probe can advance borings to at least 20 ft in the most difficult New England soils and ledge with our state of the art Down the Hole Hammer. It can advance sub-surface borings and install wells up to 2” diameter to a depth of 20 feet or more where standard wheeled rigs can’t go. And when the 9600 is too big for the location the 9600P Tether Unit takes over.
|
Specifications
Length 120”
Width
60”
Height
72” (collapsed mode)
150”
(working height)
25 HP Diesel Engine
Rubber Track Driven
5,000 lbs total weight
33,000 lbs down force
41,000 lbs pull up force
60”
cylinder stroke
Regen High Speed Hydraulic Retraction
150 ft/lbs 1,700 bpm hydraulic hammer
1,200/2,400
ft/lbs auger head @ 68/34 rpm
|
